Description

Marvos 60W Pod Kit – Freemax is now available in iVape.Sydney

Marvos 60W Pod Kit – Freemax

Freemax’s first pod mod kit with Tri-proof Technology. Besides equipped with FM COILTECH4.0, it also features IP67 Dust-Resistance and Water-Resistance, Shock Proof, Three Output Modes, Slide Airflow Control, Zinc Alloy & LSR Combination and Anti Spitback 810 Driptip, which makes it even better than the best sub-ohm mod kit in the market.

Inspired from Freemax world-known Fireluke Series. Industry-leading mesh coil technology FM COILTECH4.0 (Tea Fiber Cotton Formula & Military Grade SS904L Mesh). Outstanding performance in making abundant clouds and marvelous flavors at 20-60W

Freemax’s first product with Military Grade Tri-Proof Technology IP67 Dust-Resistance and Water-Resistance and a high level of Shock-Resistance. Water-Resistant – Protected against the effects of temporary immersion between 15cm and 1m. Duration of test 30 minutes. Dust-Resistant – Totally protected against dust and easy to clean. Shock-Resistant – Hardly broken in a shock accident.

Unlike the traditional pod with limited airflow, Marvos 60W Kit is designed with Slide Airflow Control, allowing you to change the airflow exactly to your desire for either RDL or DTL vaping needs.

Three output modes: Power, Smart and Bypass Smart Mode can automatically recognize resistance and match with suitable wattage Bypass Mode is also compatible with RBA Mode

Marvos 60W Kit utilizes a REAL 2000mAh internal battery. With Type-C USB Port and 2A Fast Charging function, it only takes 90 minutes to charge from 1% to 100%, which makes your device always have the power you need for a full day’s use.

Innovative 810 Drip Tip– Avoid Spitback Effectively. 810 driptip of Marvos DTL Pod specially designed for DTL vaping need. Upgraded with increased airflow and pass-through. V-shaped groove design at the edge of the 810 driptip prevents spitback and reduces leaking

Additional Information for Marvos 60W Pod Kit – Freemax

• Size: 123.6 x 32.6 x 30.6mm
• Weight: 129g
• Battery power: 2000mAh
• Material: Liquid silicone rubber and zinc alloy
• Output wattage: 5-60W
• Output voltage: 0.7-4.2V
• Pod e-liquid capacity: 4.5mL
• Coil resistance: MS Mesh Coil 0.25 ohm and 0.35 ohm

More Products from Freemax

What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do

Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .

Coil

The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.

Wick

Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.

Battery

The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.

Charger

The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.

It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.

WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.