Shop

Horizon Falcon 2 Subohm Tank

$40.00 Ex GST

Description

Horizon Falcon 2 Subohm Tank is now available in iVape.Sydney

 

Horizon Falcon 2 Subohm Tank

The legendary bird of prey itself has arrived for a second swoop onto the vaping scene: the Horizon Falcon 2 (II) Subohm Tank!

Owners of the original Falcon should watch out for this sleek chick with a 25mm diameter and maximum capacity of 5.2ml. The King’s solidity has been bought along here to supply the now famous top fill, secured on the side of the top cap that only needs a quick press. No more pockets full of juice, keep it in the tank where it belongs!

The usual solid airflow control down bottom and spectacular drip tip also return, but where it gets spicy is the new coil changing system. Simply unplug and replug your coil into the base of the open tank, and avoid any mess from the bottom and top for the cleanest tank experience around.

Let’s triple up on the cleanliness with Horizon’s signature sparkling flavour while we’re at it. The Falcon II (2) has a brand new coil exclusive to this tank (sorry M-series collectors). The Sector Mesh coil has been carefully crafted to compress vapor upwards as it is generated, due to the cone shape of the mesh itself. This basically means all the flavour is compacted into your vapor! The coil also heats from the bottom up to ensure no nectar escapes its grasp.

Don’t be prey, be the predator of flavour.

 

Additional Information for Horizon Falcon 2 Subohm Tank
  • Size: 56 x 28 x 25mm (max 28mm with bubble glass)
  • Capacity: 5.2ml (bubble), 3.4ml (straight)
  • New Sector Mesh coil condenses vapor for a uniquely delicious vape
  • Easy top push fill design, super secure
  • No coil threading for easy replacement
  • Attractive drip tip and well polished surfaces

 

Package Content
  • 1 x Horizon Falcon II (2) Tank w/ Sector Mesh coil pre-installed
  • 1 x Spare Sector Mesh Coil – 0.14ohm
  • 1 x Spare 3.4ml Glass Tube
  • 1 x Set of O-rings

 

More Products from Horizon Tech

 

 

What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do

 

Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .

 

Coil

The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.

 

Wick

Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.

 

Battery

The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.

 

Charger

The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.

 

It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.

 


WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.

Reviews

There are no reviews yet.

Be the first to review “Horizon Falcon 2 Subohm Tank”

Your email address will not be published. Required fields are marked *