Description
GTX Coils – Vaporesso is now available in iVape.Sydney
GTX Coils – Vaporesso
Vaporesso GTX Coils are replacement coils to suit a number of Vaporesso vape kits, tanks or pods including:
Target PM80 Pod Mod Kit
Target PM80 SE Pod Mod Kit
Target 80 Kit
Luxe 80 S Pod Mod Kit
Luxe 80 Pod Mod Kit
GTX Go 40 Pod Kit
GTX Go 80 Pod Kit
Swag PX80 Pod Mod Kit
Luxe PM40 Pod Mod Kit
Luxe XR Pod Kit (40W)
Xiron Pod Mod Kit
GTX One Kit
Gen Nano Kit GTX Tank
Target PM30 Pod Mod Kit
all GTX Tanks
Gen Air 40 Pod Kit
Gen PT60 Pod Kit
Gen PT80S Pod Kit
xTank Pod.
These coils are available in many options to suit a variety of vaping styles. Packaged with 5 coils per pack (except the GTX Rebuildable Atomiser (RBA)).
Important: Please check the wattage range of the device to choose compatible coils. For example the GTX One Kit has a maximum wattage of 40W and is therefore only compatible with the 0.8 V2 and 1.2 ohm coils.
Additional Information for GTX Coils – Vaporesso
- 0.15 ohm Mesh 60W – 75W
- 0.2 ohm V2 Mesh 45W – 60W
- 0.3 ohm V2 Mesh 32W – 45W
- 0.4 ohm V2 Mesh 26W – 32W
- 0.6 ohm V2 Mesh 20W – 30W
- 0.8 ohm V2 Mesh 12W – 20W
- 1.2 ohm V2 Regular 8W – 12W
- 1.2 ohm Mesh 7W – 11W
GTX Rebuildable atomiser (RBA)
- GTX RBA Coil (main unit)
- 2 x Wires
- 2 x Screws
- 1 x O-ring 1
- 1 x O-ring 2
- 1 x Cotton
- 1 x Screwdriver
- 1 x User manual
Package Content
- 5 x GTX Coils
OR - 1 x GTX RBA Coil pack
More Products from Vaporesso
What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?
Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.
When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do
Vape Tank
The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:
Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.
Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.
Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .
Coil
The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.
Wick
Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.
Battery
The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.
Charger
The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.
It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.
WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.
Reviews
There are no reviews yet.