Description
Geekvape Aegis Legend 2 L200 Kit w/ Z Subohm Tank – Limited Edition 2 is now available in iVape.Sydney
Geekvape Aegis Legend 2 L200 Kit w/ Z Subohm Tank – Limited Edition 2
Additional Information for Geekvape Aegis Legend 2 L200 Kit w/ Z Subohm Tank – Limited Edition 2
- Kit Dimensions: 140.05 x 54.12 x 29mm
- Aegis L200 Mod:
- Batteries: 2 x 18650 (not included)
- Wattage Range: 5 – 200W
- Maximum Output Current: 45A
- Maximum Output Voltage: 12V
- Resistance Range: 0.1 – 3ohm
- Display: 1.08 inch TFT Colour
- Z Subohm Tank 2021 Version:
- Capacity: 5.5ml
- Drip Tip: 810
- Coils:
- Z0.2 Mesh 0.2ohm: 70 – 80W
- Z0.25 Mesh 0.25ohm: 45 – 57W
- Classic Aegis toughness upgraded to IP68 water and dust resistance, as well as higher level of shock resistance
- 30% lighter and 15% smaller than the original Legend
- Mod works within -20 and up to 50 degrees Celsius conditions
- Physical switch on side locks device from adjustment or firing easily
- Updated top side Type-C port with much larger and secure silicone gasket
- New 2021 version of Z Subohm Tank makes the air inflow and top fill ports larger, plus a redesigned base for better connection
- Brand new Z-Coils for even more choice in a world class subohm tank system
Package Content
- 1 x Geekvape Aegis Mini 2 Mod
- 1 x Z Nano Tank
- 1 x B0.2 Mesh 0.2ohm coil pre installed
- 1 x B0.6 Mesh 0.6ohm coil
- 1 x Coil Tool
- Spare parts pack
- Spare glass tube 2ml
- USB-C cable
More Products from Geekvape
What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?
Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.
When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do
Vape Tank
The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:
Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.
Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.
Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .
Coil
The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.
Wick
Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.
Battery
The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.
Charger
The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.
It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.
WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.
Reviews
There are no reviews yet.