Description

Drag 3 Kit TPP Pod Tank – VooPoo is now available in iVape.Sydney

Drag 3 Kit TPP Pod Tank – VooPoo

The Voopoo Drag 3 Kit with TPP Pod Tank is the third high explosive and playable super POD after DRAG 1 and DRAG 2, returning to the professionalism and playability of DRAG, supporting a variety of compatible modes, and equipped with the newly launched TPP atomization platform, will bring you unprecedented flavor and experience.

Luxurious leather, delicate metal, with hard geometric lines and brushed patterns, make DRAG 3 stylish and powerful. The engraved metal “DRAG” nameplate will become the exclusive symbol of the Drag series.

Super mode-VooPoo original high explosive mode, designed to give players the ultimate big cloud vaping experience. Drag 3 supports the easy to use SMART mode for beginners and the power free RBA mode desired by professional players. When Drag 3 is adjusted to 80w in RBA mode, it will automatically turn on SUPER Mode, the maximum power up to 177W.

The new (Tank Pod Push) is designed with a new “bi-directional convection” airway structure to maximize overall atomization efficiency. Magnetic design with 510 bottom base, giving players more space to match any favorite device. More professional equipment, more explosive power. TPP Series coils use VOOPOO’s new patented technology, which not only increases the atomization area inside the coils, but also improves the heating speed. Performance and speed join forces to experience a powerful flavor like never before.

Additional Information for Drag 3 Kit TPP Pod Tank – VooPoo

• Dimensions: 138 x 52 x 25mm
• TPP Pod Tank has 5.5mL e-juice capacity
• VooPoo TPP Coils compatible
• Dual High-Amp 18650 batteries (not included)
• Wattage output range: 5-177W
• Min atomizer resistance: 0.1 ohm
• Highly advanced GENE.FAN 2.0 Chip
• Intuitive OLED display screen
• Oversized firing button
• Safety protections include: short circuit, over temperature, battery reverse, output over-current, overcharge, over discharge and low battery
• Type-C USB charging port
• 510 connection
• TPP-DM1 0.15ohm Coil 60-80W
• TPP-DM2 0.2ohm Coil 40-60W

More Products from VooPoo

What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do

Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .

Coil

The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.

Wick

Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.

Battery

The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.

Charger

The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.

It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.

WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.