Aegis Boost 2 B60 Pod Kit – Geek Vape

$59.00 Ex GST

Colour Option


Aegis Boost 2 B60 Pod Kit – Geek Vape is now available in iVape.Sydney


Aegis Boost 2 B60 Pod Kit – Geek Vape

The new boost with new tri-proof, Stunningly leakproof design. Intelligent working modes by AS-Chip. A fresher look with 0.96-inch LED curved display. A safer carry with A-lock.


The 2nd Gen of Geekvape Tri-proof Tech makes boost a smaller and lighter companion. IP68-rating water & dust resistance, as well as a higher level of shock resistance, provide better protection in harsher environments.


A curved display allows for a more immersive and fresher visual experience. Together with the all-new UI, the vaping info gets more intuitive. Every detail is within a boost-up vision.


AS chipset is the powerful source of energy to complete all the complex tasks. SMART Mode, automatically select the best output for the best flavor and establish a limit to the maximum output level to prevent coils from burning out.

Accidental Press Protection Lock makes Boost 2 safer to carry. A simple switch prevents inadvertent button presses from overheating your coils or your mod.


The new boost is equipped with a top airflow leakproof cartridge. The airflow enters via the side inlets, making it easier to reach the coil, resulting in superior flavor and more precise airflow control.


BOOST Mode, automatically select the max output for the max clouds. Boost up the possibilities for flavor and vapors. Powered by built-in 2000mAh battery, Boost 2 serves long and supports up to 60W stable output. Stable Output Buck-boost Tech, optimize power to create consistent flavor performance even when the battery is running out.



Replaceable Components
We recommend stocking these items:

B Series Replacement Coils
Boost 2 B60 Replacement Pod



Additional Information for Aegis Boost 2 B60 Pod Kit – Geek Vape

  • Stunningly leakproof design
  • Intelligent working modes by AS-Chip
  • A fresher look with 0.96-inch LED curved display
  • A safer carry with A-lock
  • This is the new boost with new tri-proof
  • Dimensions: 71.6 x 25.9mm
  • Material: Zinc-Alloy, Leather and Silicone
  • Battery Capacity: 2000mAh
  • Wattage Output Range: 5-60W
  • Voltage Output Range: upto 7.5V
  • Max Power: 60W
  • Coil: MESH
  • Coil Resistance: 0.2 and 0.6ohm
  • Charging: USB Type-C port
  • Charging voltage: 5V
  • Refill Method: easy access top filling
  • Airflow: easy access airflow valve



Package Content

  • Geek Vape Aegis Boost 2 B60 Pod Mod
  • Geek Vape Aegis Boost 2 B60 Replacement Pod (5mL)
  • Geek Vape B Series 0.2 ohm pre installed
  • Geek Vape B Series 0.6 ohm
  • Coil tool
  • USB Type-C charging cable



More Products from GeekVape



What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do


Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .



The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.



Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.



The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.



The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.


It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.


WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.


There are no reviews yet.

Be the first to review “Aegis Boost 2 B60 Pod Kit – Geek Vape”

Your email address will not be published. Required fields are marked *