The RuleBreaker Mechanical Mod by Vaperz Cloud is now available in iVape.Sydney
Make your own rules with the spicy series edition of the popular and sexy Vaperz Cloud Stormbreaker: the Rule Breaker!
Basically, the only difference between the two mods: the Rule Breaker is a triple battery 21700 series mod! This baby hits hard (and comes with a bunch more caveats so please do read them below), dropping a solid 12.6V across three batteries to your build (assuming a 200w output)!
The design is a lot less subtle than the SB though, splattered all over a black base coat and looking like the rebel of the family. It still carries on the compatibility with 38mm atomisers and a super secure battery door down below.
The Rule Breaker has done just that, with VC’s first triple series mod ready to take the world by storm, or break? Whatever you call it, this is a beastie ready to be tamed, safely of course. Buy one once you’ve had a read below!
Now, onto the warnings. The Rule Breaker needs as much care taken as the HOG as a series device out, and must be used safely. At all times be sure that:
- Your batteries are free of any damage and tearing in the wrap
- Your batteries are suitable for use with the mod, and inserted the correct way inside the mod as per the internal markings
- You are NOT using a non-rebuildable device on top (this includes subohm tanks with pre-built coils and the like)
- The build you have placed in your atomiser is suitable (we recommend builds absolutely no lower than 0.4ohm)
- Your atomisers positive 510 pin can be adjusted to make proper contact without the negative of the pin touching the firing pin in the mod
- You are fully aware of Ohm’s Law and its effect on your device and build
If you are in any way shape or form not confident about your use of this device, DO NOT PURCHASE ONE. iVape.Sydney is not liable for misuse or injury befalling from this device and will not supply warranty for the former.
Get the original Vaperz Cloud products Now in iVape.Sydney and enjoy!
Specification of The RuleBreaker Mechanical Mod by Vaperz Cloud
- Size: 102mm x 49mm x 46mm
- Series configuration
- Batteries: 3 x 21700 (not included)
- Bottom loading battery latch door
- Fully silver plated copper contacts and internals
- VC Tech Switch for minimal voltage drop
- O-ring in top firing pin plate helps prevent liquid inside the 510
- Bottom contacts can be manually adjusted accommodate different 21700s
Due to the splatter design, no two mods look the same, and we cannot guarantee your pattern will be the same as the picture shown.
What’s in the box:
- 1 x Vaperz Cloud RuleBreaker Series Mechanical Mod
- 1 x Authenticity Card
WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.