Shop

Obelisk 120 FC Kit w/ Z Subohm Tank – Geekvape

$118.00 Ex GST

Colour Option

Description

Obelisk 120 FC Kit w/ Z Subohm Tank – Geekvape is now available in iVape.Sydney

 

Obelisk 120 FC Kit w/ Z Subohm Tank – Geekvape

Directly charge a 3700mAh vape in 15 minutes with USB-C cable, astonishingly fast and assuredly safe.
Ultra-long battery life keeps up for 2 days and allows to share your power with loved ones.
Co-worked perfectly with leakproof Geekvape Z Sub-ohm Tank or Obelisk Tank with childproof safety design,
Obelisk 120 FC awaits you to explore.

 

 

Replaceable Components
We recommend stocking these items:

 

 

 

Additional Information for Obelisk 120 FC Kit w/ Z Subohm Tank – Geekvape

  • Obelisk 120 FC Mod:
    • Battery: 3700mah inbuilt
    • Wattage Range: 5 – 120w
    • Screen: 0.96 inch Colour TFT
    • Output Modes:: VPC / TC-SS / TCR / Bypass / OTG
    • Resistance Range: 0.1 – 3.0 ohm
    • Temperature Range: 100 – 315C / 200 – 600F
    • 15 minute fast charging at 3.25A
      • Regular Type-C cable charging at 2A
    • On The Go (OTG) reverse charging at 2.4A max
  • Zeus Subohm Tank:
    • Size: 26 x 42.5mm
    • Capacity: 5ml Bubble, 3.5ml Straight
    • Coils:
      Z0.4 Mesh 0.4ohm: 50 – 60W
      Z0.2 Mesh 0.2ohm: 70 – 80W
    • Drip Tip: 810
  • Device tested and never above 45.8C internal temperature while charging in ambient (room) temperatures
  • Fast charge your devices wherever you are with OTG technology
  • Legendary AS chipset updated to AS FC chip for just as great performance and maximum safety
  • Now classic Z Subohm Tank provides renowned flavour and top tier lifespan with fully top airflow preventing leaks

 

Package Content

1 x Geekvape Obelisk 120 FC Mod
1 x Geekvape Z Tank w/ Z0.2 Mesh 0.2 ohm Coil pre-installed
1 x Z0.4 Mesh 0.4 ohm Coil
1 x Spare Bubble Glass (5ml)
1 x USB-C Charging Cable
1 x Coil Tool
Spare Parts Pack

 

 

More Products from GeekVape

 

 

What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do

 

Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .

 

Coil

The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.

 

Wick

Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.

 

Battery

The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.

 

Charger

The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.

 

It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.

 


WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.

Reviews

There are no reviews yet.

Be the first to review “Obelisk 120 FC Kit w/ Z Subohm Tank – Geekvape”

Your email address will not be published. Required fields are marked *