Description

Fireluke 3 Replacement Coils – Freemax is now available in iVape.Sydney

Fireluke 3 Replacement Coils – Freemax

Replacement coils to suit Fireluke 3 featured on the Maxus 100W kit.

Yes Yes Yes, new generation mesh material and structure is specially designed for the Freemax Fireluke 3. The mesh coil is cut precisely from customized SS904L Mesh Plate using laser, the honeycomb mesh design enables the mesh coil heating instantly and evenly. Meanwhile, the mesh coil fits the tea fiber and cotton so closely that no other type of coil can ever do.

As the mesh coil is so flat and smooth, the heat will be instantly and evenly conducted to the cotton, thus vaporizes the e-liquid instantly and evenly.

The new mesh material and structure applies in the Freemax Fireluke 3 will instantly vaporize the e-liquid, and requires a higher leading speed to mesh coil’s contact surface. Thus the new 360 degree e-liquid leading holes are designed to speed up the leading and vaporizing process.

904L X1 Mesh – 0.15Ω 40 – 80w best 70w
904L X2 Mesh – 0.2Ω 40-80w best 70w
904L X2 Mesh – 0.50Ω 20-50w best 45w
904L X3 Mesh – 0.15Ω 50-90w best 80w
904L X4 Mesh – 0.15Ω 40-80w best 70w

Fireluke 3 Coils are compatible with a number of Freemax kits and tanks, Including:

Fireluke 3 Tank
Maxus 100w Kit
Fireluke 2 Tank

Additional Information for Fireluke 3 Replacement Coils – Freemax

• 904L X1 Mesh – 0.15 ohm: 40 – 80W, best at 70W
• 904L X2 Mesh – 0.2 ohm: 40-80W, best at 70W
• 904L X2 Mesh – 0.5 ohm: 20-50W, best at 45W
• 904L X3 Mesh – 0.15 ohm: 50-90W, best at 80W
• 904L X4 Mesh – 0.15 ohm: 40-80W, best at 70W

More Products from Freemax

What are Vape Hardware, Tank, Coil, Wick, Battery and Charger?

Understanding the general components of a vapour device will help you make the right choice when it comes time to buy or upgrade your kit.

When you’re just starting out, understanding the jargon can be confusing at times – here are the essential components and what they do

Vape Tank

The tank is heat resistant and houses the coil and wick, as well as a reservoir to hold e-liquid. There are several different tank styles to choose from, each performing essentially the same function with some key differences. The following are the most common types:

Atomizer – Atomizers are best for people who prefer dripping and are the simplest in design of the three tank kinds. They can be transparent or opaque, but all house the essential components and are simple to refill, meaning it’s easy to switch between flavours when necessary.

Cartomizer – Cartomizers are similar to atomizers, with a few key differences. With a cartomizer, liquid is absorbed into polyfill which surrounds the coil, allowing it to hold much more liquid than a regular atomizer and offer longer vape time.

Clearomizer – Clearomizers use a clear plastic or glass tank so you can see the level of e-liquid and monitor when it needs refilling easily. Many models also have short wicks to allow for easier saturation and some users argue, better flavour delivery. .

Coil

The coil is a small piece of resistance wire in the shape of a coil spring that’s used as a heating element to produce a vapour from the e-liquid. They come in both single coil and dual coil formats – dual coals have two heating elements, while single coils only have one. The wire is wrapped around the wicking material (or in the case of a self built or pre-made coils, the wick is fed through the middle of the coil) and connected to the power source.

Wick

Wick is the absorbent material – typically cotton, twisted silica cord or stainless steel mesh – that carries liquid to the coil. The wick delivers e-liquid from the tank to the coil where it is heated and turned into a vapour so it can be inhaled.

Battery

The battery is what powers the device and makes it possible to turn the e-liquid into a vapour for vaping. While it’s one of the most straightforward aspects of an e-cigarette, there’s still a fair amount of choice when it comes to batteries. Some devices come with an internal battery that’s non-replaceable; that means if the battery stops working you’ll need to repair or replace the device.

Charger

The type of battery you use will dictate what type of charger it needs. Most e-cigarettes with internal batteries can be charged via a USB-charger for maximum convenience. They can be charged via your computer or using an adapter plug.

It is important to always follow the charging instructions provided with your vapour device, and to never leave it charging unattended.

WARNING: This is an smoking Item. Please use at own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. iVape.Sydney are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.